Beam clamps, lifting clamps prove to be highly useful when it comes to lifting heavy loads with ease. There are many industries that use these clamps for various purposes. It becomes easier to gain control over the load using beam clamps. This is what makes them highly useful.
But like any other mechanical device one need to maintain safety during using the clamp. A little carelessness can result in a bigger mishap. Hence, it is good to follow all the safety measures and use the beam clamp safely.
Just a few little precautions and you will be good to go. Leading beam clamp manufacturers cleanly states the most important safety measures that one must follow while using clamps. So, let us have a look at these important safety measures:
Size Check for Beam & Clamp:
Before you use the clamp cross-check almost every specification to verify that everything is as per the requirements. One of the most important things in this area is to check if the size of the clamp is the right size to be used along with the beam.
If the size is not proper then their connection might get loose while operating which might lead to serious accidents. Hence, make sure that this does not happen as suggested by leading lifting clamps manufacturers. Always check and verify the size.
Check the Condition of the Screw Thread:
Another important check to do is for the screw thread. This is to ensure that the condition of the screw thread is good and fit to be used. If the thread is found prone to damage or tear it must be immediately replaced.
Working with damages screw threads can prove to be quite harmful and dangerous. Hence, it must be checked well in advance as said by top chain hoist manufacturers.
Check the Tommy Handle Before Use:
Another important thing to check other than the screw thread is the tommy handle of the beam clamp. Wear and tear of this tommy handle can once again lead to serious harm and damage.
Hence, if anything wrong gets detected with the tommy handle it must be immediately marked and taken care of as said by leading beam clamp manufacturers.
Make Sure the Load Limits are Obeyed:
No matter how good quality beam clamp you use the load limits must always be maintained. Never exceed the load limits even by a little. Always play safe obeying the limits as instructed by your beam clamp supplier.
The beam clamp is designed for vertical lifts. Make sure that it is used only for the defined purpose. Ensure that no experiments are done with its usage, as this might prove dangerous. So, use it for lifting the right amount of load in the right manner.
So, follow these safety tips and keep the working site of your industry safe and secured from all kinds of accidents and mishaps. In case you want to know more about the beam clamp functioning connect us anytime you like.