TX Series Aluminun Alloy Winch

TX Series Aluminun Alloy Winch

  • Technical Parameters
  • Dimensions
  • Features
Model TX-503 TX-505 TX-510 SN-201 SN-203 SN-205 SN-210
Rated Load on Cable (kgs) 50Hz 1st Layer 360 600 1000 180 300 600 1000
Rated Load on Cable (kgs) 50Hz 3rd Layer 360 600 1000 180 300 600 1000
Rated Load on Cable (kgs) 50Hz Top Layer 236 437 931 145 291 473 931
Rated Winding Speed of Cable (m/min) 50Hz 1st Layer 18 11.1 5.7 14.8 7.1 4 1.6
Rated Winding Speed of Cable (m/min) 50Hz 3rd Layer 22.8 14.7 8 19.3 9.3 5.4 2.3
Rated Winding Speed of Cable (m/min) 50Hz Top Layer 34.8 20.2 10.3 23.8 11.5 7.4 3
Cable Winding Legth in Total(m) 1st Layer 13.2 10.5 8.5 7.5 7.5 10.5 8.5
3rd Layer 45 36.9 30.8 26.1 26.1 36.9 30.8
Top Layer 155.2 89.6 60 49.4 49.4 89.6 60.6
Cable Dia in Use 6 8 10 6 6 8 10
Motor Type Fully-Sealed and sell - Cooling type Capacitor Activated & Operated
Output 2.2KW 0.75KW
Number of Poles 4P 4P
Rated Voltage & Current Three Phase 380V 50Hz,4.7A Single Phase 220V 50Hz,5A
Insulation Type F Type B
Load Hour Factor 25% ED 25% ED
Braking Ratio Over 150% Over 150%
Operation With 2 or Button switches (Indirect Operation)
Reduction Ration 23.28 38.59 76.18 25.05 51.57 107.14 261.91
Winch Weight (Kgs) 70 70 70 70 70 70 70
A B B1 B2 C D E F G H I J K L M N X Y Z
538 335 82.5 120.5 300 Φ89.1 Φ190 Φ18 174.5 315 100 109 Φ15 500 345 105 290 22.5 50
  • The components of alumimum cast and plastic made the winches very light. Furthermore, the winches are designed to be compact with unique winding drums and driving motors assembled in parallel. The winches can be installed in very narrow spaces.
  • Motors and reduction gears are installed in alumimum cast cases, and electromagnetic brake, braking power units and capacitors (only SX Series) are in engineering plastic cases: which resulted in making the winches resistant well against dust, drip and rust.
  • An urea grease of high quality lasts for so long time that frequent lubrications is not needed. It is free to install the winches at any position, such as on floors, on walls or even upside down. The winches were designed to be quiel and compact mobility. (Except the case of installing on floors, clients are requested to contact us in advance due to the problems such as weep holes.)
  • Built-in motors are installed in aluminum cast cases and supplied with F-Type insulation(durable up tp max. 155℃) and B-Type insulation(durable up to max. 130℃).
  • As well as FE Seried, the winches had passed in-house durable tests 300000 times. Despite of their small sizes, these winches have been improved for strong braking power, operating accuracy and alonger lift span. A brake plate is made of earth friendly materials of nonasbestos.