Overhead cranes are widely used across a wide spectrum of industries. Many jobs are now made simpler and easier with the help of overhead cranes. Their importance and significance make the buyers do a detailed survey before making the purchase of the crane.
In the market there are not different kinds and types of cranes available. There is double girder overhead crane and single girder overhead crane. Both hold equal importance with respect to the tasks they make achievable easily.
Despite having the perfect crane, it is possible to have common failure issues at the sight. These common failures can easily be taken care of and there is nothing to panic about the same. Hence, it is always good to know about these failures well in advance so that these can be easily taken care of whenever occurs.
Today we will have a look at these common failures and steps to follow if they occur as suggested by leading single girder overhead crane suppliers. So, let us see at these common failures and ways to tackle them:
Controller stopped Wrong:
One of the root causes for most of the failures that occur at the workplace is because the controller was not stopped at the correct time or at the correct position. This may be because of a sudden power cut or because of the miscommunication between the driver and the handler or because of the lack of a driver’s experience.
Hence, whenever you see a break failure condition first of all check if the controller was stooped correctly or not. If the machine failure or irregularity is because of this it can get easily solved.
Hence, check for the controller as suggested by the leading double girder overhead crane suppliers.
Another common failure that is experienced while working with overhead cranes is losing control over the hook which leads to hook freefall. This is usually because the reverse brake lost its contact which resulted in brake failure.
In such a situation it is advisable to turn off the crane at the moment and look for the brake failure. These signs of ignored could lead to bigger damage in future. Hence, whenever such kind of irregular activity is noted it is good to take care of it immediately.
Brake failure is another common mishap that happens while working with overhead cranes. While operating the crane if sudden brake failure is experienced it is advisable to perform the reverse operation.
Emergency controls should be used to tackle this situation. After the activity completion, the brakes should be properly tested and checked and the crane should be fixed. Try finding the cause that leads to the brake failure so that it can be avoided in future as said by leading single girder overhead crane suppliers.
So, from now on never ignore the signs and always tackle the failure correctly. If you have any doubts or questions about cranes please feel free to ask us any of them.