A cable puller is a great tool for pulling or tensioning, as they are very handy to carry around on work sites. Using the right capacities of cables and pullers, they are very safe and efficient to use, but make sure to buy only from one of the best cable puller suppliers. Not only in industries, but also in day-to-day usage cable pullers are of great use to get out of tacky situations, for instance, cable puller can pull out the car just in a matter of minutes when stuck in mud or sand.
Basically, it is similar to a ratchet with the handle being shuffled back and forth to steer the cable around the drum, dragging the load attached to the hook. Cable pullers are extensively used in various industries, and have many usages. It is compact and lightweight which makes it practical to be used in modern industries.
Industries Using Cable Pullers
Mining, constructions, refineries, civil engineering, recreational use, factories, and forestry to name a few. Cable pullers are especially designed and manufactured for lowering, pulling and tensioning and within these industries where there is a frequent need for pulling loads.
In general, their working load varies from 5 tons to 32 tons for the more heavy-duty products. A small cable puller comes in handy in different situations and environments, as it can be carried anywhere because of its lightweight. Pulling and tensioning are usually the key focus of cable pullers, however lowering and lifting of loads are generally not allowed on several products, that why before using it’s important to ask the cable puller suppliers beforehand to avoid any unexpected accidents or failures.
Every equipment used in industries or general needs a few considerations which are very important to keep in mind. You should not use badly rusted or worn cables as they may pose a risk when used in the cable pullers. Severe damage or injury can be caused by catastrophic failure which is the result of cable breakage. Add a dampener to the cable as it lowers the risk of the cable coming back at speed to prevent hitting you in case the cable breaks. Before pulling make sure to have the appropriate load weights and capacities to avoid pulling over the load limit of the cable puller.
Before every usage, make sure to inspect the cables and cable pullers to check if they are worn or damaged. It will ensure the safety of the operator and ensure the longevity of the puller. Being one of the leading cable puller and cable busbar suppliers, we offer built-in overload protection to offer additional protection in cases where the load was weightier than expected.
What makes a good cable puller?
We have compiled a list of features to help you buy the right cable puller—
Metal type used
To choose the right cable puller, the metal used to manufacture it plays an important role. It is preferred to choose high-grade steel because of its high shear tolerance which prevents the unit from collapsing under extremely heavy loads.
Another important factor to consider is the frame construction as it helps in determining the unit strength. Single-piece frame construction is usually considered better. Because when multiple pieces are welded or bolted together, it results in more failure points on the cable puller with heavy usage. Using parts manufactured with high-quality parts results in longer life and is eventually a solid investment to make.
How to Maintain Cable Puller?
Proper and timely lubrication of the cable puller can help your equipment to last longer and work appropriately. Before every usage, make sure to inspect your cable and puller properly to look for any potential defect which could lead to unexpected accident or damage.
When it comes to pulling or tensioning loads, cable pullers are a brilliant tool to add to your toolbox. In industries with the requirement of pulling heavy loads, MIT Hoist’s range of heavy-duty, reliable cable pullers will offer outstanding versatility and pulling capacities. MIT Hoist has a great reputation when it comes to the durability and performance of our products.